NEWS CENTER
Classification of thin-section bearings

Classification of thin-section bearings

19 Jul,2022

Generally divided into rubber seal-RS, iron seal-ZZ, plane, iron card-K, copper card-M. For example: 608RS, 6914ZZ, 61926K, 61844M. Thin Wall Crossed Roller Bearings CRA series thin-walled crossed roller bearings (outer ring split type) are small and lightweight crossed roller bearings made of thinner outer ring and inner ring. The mounting parts of the bearings can be lightened..

MORE
Inch tapered roller bearing numbering system

Inch tapered roller bearing numbering system

19 Jul,2022

Inch tapered roller bearing numbering system The new number consists of five parts of letters and numbers:

MORE
Precision bearing distinction

Precision bearing distinction

19 Jul,2022

Precision bearing distinction Precision bearings and ordinary bearings should be distinguished from the following points: 1. Dimensional requirements are different, and the dimensional deviation (inner diameter, outer diameter, ellipse, etc.) of products with high precision grades is smaller than that required by products with low precision grades;

MORE
Precision bearing fit

Precision bearing fit

19 Jul,2022

Precision bearing fit In order to ensure that the bearing does not produce excessive deformation after installation, it must be done:

MORE
Improve coordination method

Improve coordination method

19 Jul,2022

In order to improve the actual matching accuracy of bearing installation, it is necessary to use measuring methods and measuring tools that do not deform the bearing to carry out actual precise measurement of the matching surface dimensions of the inner hole and outer circle of the bearing, and the measurement of the inner diameter and outer diameter can be carried out All the items are measured, and the measured data are comprehensively analyzed, based on which, the dimensions of the bearing installation parts of the shaft and the seat hole are precisely matched. When actually measuring the corresponding dimensions and geometric shapes of the shaft and seat hole, it should be carried out under the same temperature conditions as when measuring the bearing.

MORE
Composition of combined roller bearings

Composition of combined roller bearings

19 Jul,2022

Composition of combined roller bearings The bearing has a sealed structure and is filled with grease to provide long-term effective lubrication, and the user can avoid lubrication. For the use of harsh working conditions, a channel for replenishing grease can be designed to improve the service life of the bearing. Improper methods can also cause the roller bearing to heat up. Lubrication can reduce the wear of parts during movement, ensure the precision of the press, and reduce energy consumption. Lubrication is divided into thin oil lubrication, thick oil lubrication and so on. Composition of combined roller bearings

MORE
< 12 >

JOJO : +86 176 2291 1708

Ivy : +86 159 2219 3318

sales@rtbbearing.com

export@rtbbearing.com

JOJO : 176 2291 1708

Ivy : 159 2219 3318

WhatsApp

WhatsApp

WeChat

WhatsApp

WeChat

WeChat

WeChat

WeChat

Powered by www.300.cn

JINAN2

Copyright © 2022 Shandong TFN Bearing Industry Co.Ltd

SEO