BEARING

Joint bearing

The type, quantity, level, and production concentration of bearings have a major impact on the development of the entire bearing industry. Therefore, it has always been the key development area of the bearing industry.

Ceramic bearing

The rings and balls of all-ceramic deep groove ball bearings are made of silicon nitride (Si3N4) ceramic material. This bearing can be designed as a full ball or with PTFE, PEEK or stainless steel 304/316 cage. PTFE is the default standard cage.

Precision bearings Angular contact bearings

According to the ISO classification standard, precision bearings are divided into: P0, P6, P5, P4, P2. The grades increase in turn, among which P0 is ordinary precision, and other grades are precision grades. Of course, different classification standards and different types of bearings have different classification methods, but the meaning is the same. In terms of the performance of precision bearings, the rotating body is required to have high runout accuracy, high-speed rotation, and small friction and friction changes. Since the accuracy of the precision bearing itself is within 1 μm, it is required to have high dimensional accuracy and shape accuracy with its matching parts (shaft, bearing seat, end cover, retaining ring, etc.), especially the accuracy of the mating surface should be controlled at the same level as the bearing level, this is crucial.

Inch tapered roller bearings

Inch tapered roller bearings refer to tapered roller bearings whose dimensions are measured in inches, originating from British and American countries; Structural form: single row double row four row

Thin-walled bearings

The thin-walled bearing realizes the extremely thin bearing section, and also realizes the miniaturization and light weight of the product. The variety of products expands its scope of use. In order to obtain the bearing's low friction torque, high rigidity, and good rotation accuracy, steel balls with a small outer diameter are used. The use of hollow shafts ensures light weight and space for wiring.The series has a variety of dust cover forms, stainless steel forms, and wide forms, etc.

Cross shaft

The type, quantity, level, and production concentration of bearings have a major impact on the development of the entire bearing industry. Therefore, it has always been the key development area of the bearing industry.

Excavator bearings

Excavator bearings include: excavator travel bearings, excavator slewing bearings, excavator needle roller bearings, excavator gearbox bearings, excavator travel motor bearings, excavator travel drive bearings, excavator joint bearings, excavator slewing support bearings and Inch non-standard bearings used on excavators.

Cylindrical Roller Bearings

The type, quantity, level, and production concentration of bearings have a major impact on the development of the entire bearing industry. Therefore, it has always been the key development area of the bearing industry.

Spherical Bearings

The type, quantity, level, and production concentration of bearings have a major impact on the development of the entire bearing industry. Therefore, it has always been the key development area of the bearing industry.

Self-aligning ball bearing

The type, quantity, level, and production concentration of bearings have a major impact on the development of the entire bearing industry. Therefore, it has always been the key development area of the bearing industry.